Fujitsu SPARC Enterprise T2000, Installation Manual, Page: 44 / 88

18 SPARC Enterprise T2000 Server Installation Guide • April 2007
d. At the rear of the rack, repeat Step a through Step c . for the rear ends of the
rails.
9. Deploy the anti-tilt bar, if the chassis or rack is so equipped.
Caution –
The weight of the server on extended slide rails can be enough to
overturn an equipment rack.
Caution – The server weighs approximately 40 lb (18 kg). Two people are required
to lift and mount the system into a rack enclosure when using the procedures in this
chapter.
10. Insert the ends of the mounting brackets into the sliding rails (
FIGURE 2-7
).
FIGURE 2-7
Mounting the Chassis on the Slide Rails