SK-96390-100PMC User Guide
Chapter 2 Jumpers and Switches
UG-960017-11
- 20 -
© Fujitsu Microelectronics Europe GmbH
2.9 LIN
Interface
(X8, JP: 17,18,21,22,24)
One 9-pin D-Sub female connector is used
for the LIN-communication.
Connector X8:
Jumper
Setting
Description
Closed
LIN A enabled
JP17
(LIN A enable)
Open
LIN A disabled
Closed
LIN A is LIN Master
JP18
(LIN master)
Open
LIN A is LIN Slave
JP21
(LIN A RX)
Closed
RX2 is connected to LIN A (X8)
JP22
(LIN A TX)
Closed
TX2 is connected to LIN A (X8)
Closed
LIN bus (X8 pin 1) is powered by the board
JP44
(LIN Vbat)
Open
LIN bus (X8 pin 1) is not powered by the board
Table 2-8: LIN A Settings
2.10 CAN interface
(JP: 25, 26)
One high-speed CAN-transceiver can be connected to the microcontroller’s CAN interfaces
(CAN A).
Jumper
Setting
Description
JP25
(CAN A RX)
Closed
RX0 is connected to CAN0 (X10)
JP26
(CAN A TX)
Closed
TX0 is connected to CAN0 (X10)
Table 2-7: CAN Settings
BUS +Ubat
GND
1
6
5
9