Fujitsu SCANPARTNER 600C, User Manual

Page: 53 / 95

4-25
(e) ISO version, ECMA version, ANSI approved version: Byte 2
Indicates the version number of the governing standard. This scanner returns X'02' (SCSI-2).
(f) Asynchronous event notification capability (AENC): Byte 3
This scanner does not support this field, so it returns B'0'.
(g) Response data format: Byte 3
Indicates the standard, and its version number, that governs the format of inquiry data. This scanner returns
B'0010' (SCSI-2).
(h) Additional length (n-4): Byte 4
Specifies the number of bytes, from byte 5 to the last byte. This value will not change with the allocation length
value specified in CDB. This scanner returns ~5B' (the 91 bytes from byte 5 to byte SF).
(i) RelAdr, Wbu~2, Wbusl6: Byte 7
This scanner does not support ReIAdrIwbus32(Wbusl6. This scanner returns B' 000'.
(j) SYNC (synchronous transfer): Byte 7
This scanner returns B'0' ("synchronous transfer not supported").
(k) Linked, cache, CMDQUE: Byte 7
This scanner does not support linked/cache/CMDQUE. This scanner returns B'000'.
(l)
sftRst
(Soft
Reset): Byte 7
This scanner performs Hardware Reset. This scanner
returns
B'0'.
(m)
Vendor identification: Bytes
8 to
F
Indicates the vendor of the logical unit in ASCII code. The vendor name is left-justified, with the blank filled
with spaces (x'20'). This scanner returns "FCPA".
(n)
Product identification: Bytes 10 to 1F
Indicates the product name in ASCII code. The name is left-justified, with the blank filled with spaces (X'20').
This scanner returns one of the following names:
Scan Partner 10
(o) Product revision level: Bytes 20 to 23
Indicates the version number of the product in ASCII code. This number is left-justified, with the blank filled
with spaces (X'20').
(p) ADF mode: Byte 24, bit 7
0: No built-in ADF module
1: With built-in ADF module
(q) Color mode: Byte 24, bit 6 to 4
000: B&W image only
001: 3-pass color scan mode
101: 1-pass color scan mode
(r) Color plane sequence: Byte 24, bit 3 to 0
0000: RGB