Fujitsu PRIMERGY TX200 S2, User Manual

Page: 239 / 317

239
PRIMERGY TX200 S2 User’s Guide
8
Con
figurin
g Hardwa
re
a
nd utili
ties
Parallel Mode • Printer
• Bidirection (at the time of
purchase)
• EPP
• ECP
Sets the data transfer mode of the parallel port.
Diskette Controller • Disabled
• Enabled (at the time of
purchase)
Configures the floppy disk controller.
Floppy Type Local (Fixed parameter) Sets the type of floppy disk to be used.
When using the server's floppy disk unit, set to
[Local].
When using a remote floppy disk drive or floppy
disk image, set to [Remote] or [Remote Once].
Local Bus IDE adapter Both (Fixed parameter) Sets whether or not to use the IDE adapter.
Mouse Controller • Disabled
• Enabled
• Auto Detect (at the time
of purchase)
Sets whether or not to use the mouse connected to
the mouse port.
SCSI Controller Channel A & B (Fixed
parameter) Sets whether to enable or disable the onboard SCSI
controller.
SCSI Option ROM Scan • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to initialize the extended ROM.
LAN Controller Enabled (Fixed parameter) Sets whether to enable or disable the onboard LAN
controller.
LAN Remote Boot • Disabled (at the time of
purchase)
• PXE
Sets whether or not to perform a network boot.
This function allows booting the server via the
network. It is used for remote installation of the OS,
etc.
table: Items on the Peripheral Configuration Submenu
Item Setting Description