U41057-J19-Z146-1-76
July 2004
02
–
TX150S2
–
93
Removal/installation routines
Accessible drives and operating panel
©
S
iem
en
s
N
ix
d
or
f I
n
fo
rm
a
ti
ons
s
y
s
tem
e A
G
19
95
P
fa
d
: P
:\
0
2
-s
y
s
tem
e
in
h
e
it
e
n\
T
X
15
0S
2\
T
X
15
0S
2-
e\
T
X
15
0S
2-
e.
k
0
4
Removing dummy cover
Ê
Press together the two springs of the EasyClick rails in the direction marked
(1) to disengage the locking mechanism.
Ê
Pull the dummy cover out of the bay (2).
Ê
Remove the EasyClick rails from the dummy cover by removing the four
screws (2xUNC6-32 and 2xM3) on each side.
Keep the dummy cover for future use. In case the 5.25"drive is later
removed and not replaced by a new one, the dummy cover has to be
reinstalled to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements and
fire protection measures.
Installing dummy cover
Ê
Screw the two EasyClick rails on both sides of the dummy cover.
Ê
Push the dummy cover into the bay until the locking mechanism of the
EasyClick rails engages on both sides.
1
1
1
2
!
