Fujitsu PRIMERGY RX300 S7, Operating Manual, Page: 27 / 90

RX300 S7
Operating Manual 27
Functional overview
RAID controllers (expansion cards)
Slots
Remote Management
Controller Integrated Remote Management Controller
(iRMC S3, 32 MB attached memory incl. graphics
controller), IPMI 2.0 compatible
Trusted Platform
Module (TPM) Infineon / separate module; TCG V1.2 compliant
(option)
RAID controllers RAID 5/6 Ctrl., HDD SAS 6 Gb, LSI , 8 ports ext.
RAID level: 0, 1, 10, 5, 50, 6, 60, 512 MB Cache,
Optional BBU (based on LSI SAS2108).
RAID 5/6 Ctrl., HDD SAS 6 Gb, Fujitsu , 8 ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 1024 MB Cache,
Optional FBU (based on LSI SAS2208).
RAID 5/6 Ctrl., HDD SAS 6 Gb, Fujitsu , 8 ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 512 MB Cache,
Optional BBU (based on LSI SAS2108).
RAID 0/1 Ctrl., SAS/SATA 6 Gb, Fujitsu , 8 ports int.
RAID level: 0, 1, 10, No BBU support (based on LSI
SAS2008)
PCI-Express 3.0 x8 5 x low profile
PCI-Express 3.0 x16 2 x low profile (2nd processor required)
Slot notes One PCIe Gen3 x8 slot (slot 1) may be occupied with
a Modular On-Board LAN controller if configured.
This slot is marked with a color-coded connector
(white) and a special LAN sticker on the rear of the
chassis.
One PCIe Gen3 x8 slot may be occupied with a
Modular RAID controller if configured.
Important: 5 PCIe x8 slots are supported with the first
processor. 7 PCIe slots (including 2 PCIe x16) are
supported with two processors.