Fujitsu PRIMERGY RX2540 M6 Operating Manual Download Page 80

Page: 80 / 121

▶

Open this manual.

▶

For the remote or local installation, follow the instruction in this manual and
on the screen.

▶

Configure the settings for the general system behavior of the server using
the Server Configuration Manager.

5.9

Configuring the server without ServerView
Installation Manager

Configuring the onboard SATA controller and SAS/SATA RAID controller

▶

If applicable, configure the onboard SATA controller, see

"Notes on

configuring controllers" on page 80

▶

If applicable, configure the SAS/SATA RAID controller with Intel VROC
functionality, see

"Notes on configuring controllers" on page 80

Installing the operating system

▶

Insert the DVD for the operating system you want to install.

▶

Reboot the server.

▶

Follow the instructions on screen and in the manual for the operating
system.

5.10

Notes on configuring controllers

5.10.1

General Notes

Ensure that the power saving functions are disabled in the

Power

of the BIOS setup during operation.

Starting up

Operating Manual

RX2540 M6

Summary of Contents for PRIMERGY RX2540 M6


























































































































Search results

Summary of Contents for PRIMERGY RX2540 M6

Reviews:

Fujitsu PRIMERGY RX2540 M6, Operating Manual, Page: 80 / 121

Search results

Summary of Contents for PRIMERGY RX2540 M6

Reviews: