Fujitsu PRIMERGY RX2540 M6, Operating Manual

Page: 65 / 121

To accommodate the ventilation concept and ensure proper ventilation, any
unused areas in the rack must be sealed using dummy covers.
The power is supplied via the multiple socket outlets fitted in the rack (not valid
for Japan).
The main features of Fujitsu rack systems are as follows:
– rail systems that can be mounted without tools
–
support systems having a linear alignment feature to ensure that they can
be adjusted to different rack depths
Asymmetrical PRIMECENTER rack and DataCenter rack provide an enhanced
cable management in the lateral rack area.
3rd party racks
Installation in most current rack systems from other manufacturers (3rd
party racks) is also supported. For details please contact your sales
representative.
▶
Wire the server. Read the information in "Connecting devices to the server"
on page 70 and "Notes on connecting/disconnecting cables" on page 69 .
▶
Connect the system to the mains, see "Connecting the power cord" on
page 72 .
5.4.2 Installing the server in the rack
CAUTION
At least two people are needed to position the server on the rack rails.
(For Japan, see "
安全上のご注意 ".)
Starting up
RX2540 M6 Operating Manual 65