Fujitsu PRIMERGY RX2540 M6, Operating Manual, Page: 69 / 121

5.5 Connecting cables
5.5.1 Notes on connecting/disconnecting cables
CAUTION
▶
Always read the documentation supplied with the device you wish
to connect.
▶
Never connect, or disconnect cables during a thunderstorm.
▶
Never pull on a cable when disconnecting it. Always take hold of
the cable by the plug.
▶
Follow the sequence described below to connect or disconnect
external devices to or from the server.
▶
Ensure that you wait for 10 seconds or more after shutdown before
turning the server on.
Connecting cables
▶
Switch off the server and equipment switches.
▶
Disconnect all power cords from the properly grounded power outlets.
▶
Disconnect the DC power cord with earth grounding conductor from the
properly DC source and earth ground stud or end.
▶
Connect all cables to the server and peripherals.
▶
Connect all data communication cables into the utility sockets.
▶
Connect all power cords into the properly grounded power outlets.
▶
Connect the DC power cord with earth grounding conductor from the
properly DC source and earth ground stud or end.
Disconnecting cables
▶
Switch off the server and equipment switches.
▶
Disconnect all power cords from the properly grounded power outlets.
▶
Disconnect the DC power cord with earth grounding conductor from the
properly DC source and earth ground stud or end.
Starting up
RX2540 M6 Operating Manual 69