3
E
2.1 Preparations for Mounting This Product
Prepare the following before you start to mount this product on the server unit.
2.1.1 Items to prepare
Before you start to mount this product, prepare the following:
z
Remote service board
z
User's Manual provided with the server unit
z
Drivers CD, ServerStart CD or ServerWizard CD provided with server
z
ServerView CD provided with the server unit
z
When using the ServerStart CD, create an MS-DOS bootup disk.
Create the MS-DOS bootup disk from the ServerStart CD-ROM. The
following describes how to create the MS-DOS bootup disk. For details,
refer to the "PRIMERGY Software Guide."
1. Boot up the system from the ServerStart CD-ROM.
2. Click "Floppy Builder" in the ServerStart screen.
3. Click "Create a Hardware Configuration Tool Boot Floppy"
Follow the on-screen message, and insert the "Hardware Configuration Tool
Boot Floppy" attached with the server unit into the floppy disk drive.
4. From here on, continue the procedure following the on-screen messages.
The floppy disk will be automatically formatted, and copying of files will begin.
