4
Power cord selection
The power cord for this unit has been packed
separately and has been selected according
to the country of destination. It must be used
to prevent electric shock. Use the following
guidelines if it is necessary to replace the
original cord set.
The female receptacle of the cord set must
meet CEE-22 requirements (see Figure).
For the United States and Canada
Use a UL listed and CSA labeled cord set consisting of a three conductor cord with a
maximum length of 15 feet.
For units which stand on a desk or table, type SVT or SJT cord sets shall be used.
For units which stand on floor, only SJT type cord sets shall be used.
The cord set must be selected according to the current rating for your unit.
Please consult the table below for the selection criteria for power cords used in the United
States and Canada.
Cord Type
Size of Conductors in Cord Maximum Current Rating of Unit
SJT
18 AWG
10 Amps
16 AWG
12 Amps
14 AWG
12 Amps
SVT
18 AWG
10 Amps
17 AWG
12 Amps
2.MK3166(E)
02.7.2, 3:12 PM
Page 4
Adobe PageMaker 6.0J/PPC
