8
Adding devices
Where plug-in printed circuit board assemblies, disk drives, tape drives or other assemblies
are fitted in this equipment by the user, or peripheral devices connected externally to this
equipment, such assemblies or devices not supplied by Fujitsu LTD. via your system supplier
MUST:
●
Conform to the safety requirements of IEC 950 or the applicable equivalent national
requirements.
●
Not affect the integrity of the SELV circuits in the equipment.
●
Conform with the EMC requirements, immunity and Class B for emission, for the
country of installation (i.e. EN500082 & EN55022 Class B - Europe; FCC Class B -
USA/Canada).
●
Conform to national requirements for approval of telecommunications networks and/or
services.
All cables used to connect this equipment to external peripheral devices MUST be shielded
with overall metal screen grounded to earth at both ends.
It is the responsibility of the user to ensure that these conditions are complied with and they
should request the supplier or manufacturer of each assembly to provide assurance on these
points.
Changes and modifications to this equipment not expressly approved by Fujitsu LTD. could
void the users authority to operate the equipment.
2.MK3166(E)
02.7.2, 3:12 PM
Page 8
Adobe PageMaker 6.0J/PPC
