Appendix A Check Sheet (Installation/Operation Check)
69
E
Appendix A
Check Sheet
(Installation/Operation Check)
Tape Drv LTO2 Ultrium2 200GB is a precision instrument and improper daily operation (cleaning/
data cartridge management/ installation environment, etc.) will lead to troubles such as backup
failure.
We provide here an "Operation Check Sheet" to avoid troubles. The following items are
recommended operations by Fujitsu. Make sure to check backup operations.
Classific
ation
No
Check
Check item
Description / tasks (*)
Cleaning
1
❑
Is head
cleaning per-
formed once
every three
months?
Periodical cleaning is required as the magnetic head
accumulates dust or dirt regardless of the use of this
product. If soiled with dust or dirt, the magnetic head
may scratch the surface of the tape or reduce the life
of the data cartridge. This product provides a
function that causes the CLEAN LED to light up
after 100 hours of use urging you to perform
cleaning.
* Clean this product every three months.
2
❑
Is cleaning per-
formed when
the CLEAN
LED turns on?
This product provides a function that causes the
CLEAN LED to light up after 100 hours of use or
when it judges that cleaning is required, urging you
to perform cleaning.
If the product is used while the CLEAN LED is on,
the data cartridge and backup data may be damaged.
It is also possible that the worn-out data cartridge
will soil the head, etc.
* When the CLEAN LED turns on, immediately
perform cleaning. If the CLEAN LED turns on
again, consider replacing the data cartridge.
3
❑
Is the
replacement
cycle of the
cleaning
cartridge set to
the replacement
cycle of the
product (per
50)?
The cleaning cartridge is required to be replaced at
the earlier timing of either after being used 50 times
or after five years of use.
* Replace the cleaning cartridge periodically
according to the operations.
