52
4
Click the [Start] button
→
[Control Panel]
→
[System] in this order.
5
Select the [Hardware] tab and click [Device Manager].
The device manager starts.
6
Double click [Other devices], and then double click [TANDBERG
TS400 SCSI Sequential Device].
7
Select the [Driver] tab and click [Update Driver].
The Setup Wizard appears.
8
When the "Can Windows connect to Windows Update to search for
software?" message appears, click [No, not this time] and then
click [Next >].
Follow the wizard for installation.
9
For installation methods, click [Install from a list or a specific
location] and click [Next >].
10
For search and installation options, select [Search for the best
driver in these locations] and set the following options.
• Uncheck
[Search removable media (floppy, CD-ROM, etc.)]
.
• Check [Include this location in the search] and specify the folder which restored the driver.
• When restored in the floppy disk drive A
A:\lto2\i386
• When restored in Temp folder of the drive C
C:\Temp\Ito2\i386
• When using CD-ROM
[CD-ROM drive]:\DRIVERS\tape\lto2\i386
11
Click [Next >].
The "Completing the Hardware Update Wizard" message appears.
12
Click [Finish] to exit.
Under [Tape Drive], [TANDBERG TS400 SCSI Sequential Device] appears.
13
According to the chapter about "Operation after installing internal
backup device" in the FT model User’s Guide, perform redirect
operation to FTvirtual Server.
14
After installing the driver by repeating steps 4 - 12 to FTvirtual
Server, restart FTvirtual Server.
