Fujitsu PRIMEPOWER 800 Page 49 Operating Manual Download

Page: 49 / 86

Using the power-management features

Preparation for use and operation

A26391-K82-Z101-3-7619

Automatic activation

If the notebook is running and is not used for a predefined period of time, it switches into Suspend
mode.

In the

Power Setup

set the

Power Setup - Power Savings

field to

Customize

and set the time

which has to elapse before the notebook switches to Suspend mode in the

Suspend Timeout

field.

In the

BIOS Setup

menu set the

Power Setup - Suspend Mode

field to

Save to Disk

Suspend

In the

BIOS Setup

menu set the

Power Setup - Power Savings

field to

Maximum Performance

Maximum Power Savings.

In the

BIOS Setup

menu set the

Power Setup - Suspend Mode

field to

Save to Disk

Suspend

Decreasing reading speed of the CD-ROM drive

Decreasing the rotating speed of the CD-ROM drive saves power. Press the insert/eject button for
roughly two seconds.

Display

Switching off the display does not affect running programs.

Enabling:

Disabling:

Automatic power down

You set this function in the

BIOS Setup

(see manual "BIOS Setup").

If the notebook receives no input for a predefined period of time, the display switches off
automatically. The next input switches the display on again.

In the

BIOS Setup

set the

Power Setup - Power Savings

field to

Customize

and set the time

which has to elapse before the display switches off in the

Video Timeout

field.

In the

BIOS Setup

menu set the

Power Setup - Power Savings

field to

Maximum Performance

Maximum Power Savings.

Summary of Contents for PRIMEPOWER 800























































































Search results

Summary of Contents for PRIMEPOWER 800

Reviews:

Related manuals for PRIMEPOWER 800

Brands by name

Popular brands

Fujitsu PRIMEPOWER 800, Operating Manual

Search results

Summary of Contents for PRIMEPOWER 800

Reviews:

Related manuals for PRIMEPOWER 800

Brands by name

Popular brands