A26391-K82-Z101-3-7619
49
Memory extension
!
The notebook must be switched off when installing/removing the memory modules and
may not be in the Suspend mode.
So that the current data can be saved in the
Save to Disk
suspend mode, sufficient
memory space must be available on the hard disk (at least the size of the main memory
+ 2 Mbytes).
If the main memory size is increased and you use the
Save to Disk
suspend mode on the
notebook, then you must check the size of the first partition and adjust it if necessary with
the operating systems Windows NT and OS/2 Warp (see the manual for the respective
operating system).
Install only memory expansions that satisfy the requirements and rules governing safety,
RFI and electromagnetic compatibility and relating to telecommunications terminal
equipment (see the chapter "
").
Use only memory expansions which have been released for your notebook.
Never use force when installing or removing memory modules.
Make sure that foreign objects do not fall into the memory module compartment.
Memory modules
The main memory of your notebook can be upgraded to 64 - 512 Mbyte with up to four 64 or 128
Mbyte memory modules or with up to two 256 Mbyte memory modules. The memory modules may
be mixed as required. The notebook will not start without memory modules, as no fixed main
memory is installed.
Mobile 800 / Mobile
800 AGP:
128 Mbyte 2-bank modules (100 MHz) may only be inserted in slots A, B and C.
256 Mbyte modules are not supported.
Mobile 800 S:
128 Mbyte 2-bank modules (100 MHz) may only be inserted in slots A, B and C.
256 Mbyte modules (100 MHz) may only be inserted in slots A and C. Slots B
and D must remain unused.
