E-13
English
PUTTING BATTERIES IN THE REMOTE CONTROL
1
To remove the cover, slide it
outwards while pressing it down.
2
Place two AA batteries in the
remote control. Make sure that the
batteries are properly oriented.
3
Close the cover until it snaps into
place.
Note
The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.
Do not use rechargeable batteries (Ni-Cd).
CAUTION:
Be sure to use replacement batteries of the same type as the original ones.
When disposing of used batteries, please comply with governmental regulations or environmental
public institution’s rules that apply in your country/area.
PRECAUTIONS
To prevent malfunction, be sure not to apply any form of severe shock to the remote control.
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or
heating equipment.
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.
USING THE REMOTE CONTROL
e04̲psu4h10w(07̲15)j.p65
02.10.4, 0:04 PM
13
