1
E
1 Overview
This card is for use with the PRIMERGY (simply called "SERVER"). The card
functions as an interface between the SERVER PCI bus and SCSI devices.
This card incorporates the SCSISelect utility, which lets you easily change the card
settings.
The summarized specifications are given below:
Summarized specifications
Manufacturer's device type
AHA−2940U2W
Card type
SCSI-3 compliance
Bus interface
PCI V2.1 compliance
Data transfer system
Bus master DMA
SCSI controller
AIC−7890
Number of SCSI channels
One channel per card
Maximum transfer speed
Synchronous: 80 MB/s; and asynchronous: 6 MB/s
Connector
Internal SCSI 68-pin 16-bit connector (ULTRA2)
Internal SCSI 68-pin 16-bit connector (ULTRA) (not
supported)
Internal SCSI 50-pin 8-bit connector (ULTRA) (not
supported)
External SCSI 68-pin 16-bit connector (ULTRA2)
Notes
・ Since this card places a restriction on the SCSI connectors that can be
used by the SERVER, refer to the documentation for the SERVER before
connecting the SCSI connector.
・ For operating this card under the cluster configuration, use the device
driver referring to the instructions of the cluster kit.