background image

18

L i f e B o o k   N   S e r i e s   U s e r ’ s   G u i d e

TouchPad Pointing Device

The TouchPad pointing device is built into your note-
book. It is used to control the movement of the pointer 
to select items on your display panel. The TouchPad is 
composed of a cursor control, a left and right button, 
and an up-and-down scroll button. The cursor control 
works the same way a mouse does, and moves the cursor 
around the display. It only requires light pressure with 
the tip of your finger, and the more pressure you use, the 
faster the cursor will move. The left and right buttons 
function the same as mouse buttons. The actual func-
tionality of the buttons may vary depending on the 
application that is being used. The up-and down scroll 
buttons allow you to quickly navigate up and down a 
screen. 

(Figure 2-10)

CLICKING

Clicking means pushing and releasing a button. To left-
click, move the cursor to the item you wish to select, 
press the left button once, and then immediately release 
it. To right-click, move the mouse cursor to the item you 
wish to select, press the right button once, and then 

immediately release it. You also have the option to 
perform the clicking operation by tapping lightly on the 
TouchPad once. 

(Figure 2-11)

Figure 2-11.  Clicking

DOUBLE-CLICKING

Double-clicking means pushing and releasing the left 
button twice in rapid succession. This procedure does 
not function with the right button. To double-click, 
move the cursor to the item you wish to select, press the 
left button twice, then immediately release it. You also 
have the option to perform the double-click operation 
by tapping lightly on the TouchPad twice. 

(Figure 2-12)

Figure 2-12.   Double-clicking

Figure 2-10.  Touchpad Pointing Device

1
2

Cursor Control
Left Button

3
4

Scroll Button
Right Button

1

2

3

4

An external mouse can be connected to 
the USB port on your notebook, and be 
used simultaneously with the TouchPad. 
However, if you boot the system with an 
external mouse connected the TouchPad 
will be disabled or enabled depending on 
your BIOS settings. 

(See BIOS Setup Util-

ity on page 27 for more information)

If the interval between clicks is too long, 
the double-click will not be executed.

N6110.book  Page 18  Wednesday, May 18, 2005  11:19 AM

Summary of Contents for N6110 - LifeBook - Pentium M 1.86 GHz

















































































































Reviews: