C141-E055-02EN
2 - 3
MPC3084AT/MPC3096AT/MPC3102AT Model
MPC3032AT Model
Spindle
Actuator
0
1
MPC3043AT Model
Spindle
Actuator
0
1
2
MPC3064AT Model
Spindle
Actuator
0
1
3
2
Spindle
Actuator
0
1
4
3
5
2
Figure 2.2
Configuration of disk media heads
(3)
Spindle motor
The disks are rotated by a direct drive Hall-less DC motor.
(4)
Actuator
The actuator uses a revolving voice coil motor (VCM) structure which consumes low power
and generates very little heat. The head assembly at the tip of the actuator arm is controlled
and positioned by feedback of the servo information read by the read/write head. If the power
is not on or if the spindle motor is stopped, the head assembly stays in the specific CSS zone
on the disk and is fixed by a mechanical lock.
Summary of Contents for MPC3032AT
