Fujitsu MB2145-507, Hardware Manual

Page: 6 / 49

v
Indicates that improper use may cause minor or moderate injury,
or may damage the emulation pod, connected equipment, data
or other software resources, or other property.
Warning
text/symbol
Warning page:
Prohibition When disconnecting a cable, hold the cable by the connector
case. Do not pull on the cable.
Doing so may break a wire in the cable. 17, 19,
20
Before mounting the evaluation MCU, turn off the power.
Failure to do so may cause an electric shock. 22
Before operating the clock switch, turn off the power.
Failure to do so may cause an electric shock. 23
Before setting the jumper switch for the power supply, turn off the
power.
Failure to do so may cause an electric shock. 25
Before setting the jumper switch for the C-pin circuit connection,
turn off the power.
Failure to do so may cause an electric shock. 27
When turning on the power, follow the procedure described in the
manual.
Failure to do so may cause a device failure. 28
After the emulation pod power is turned on, do not turn off and
turn on the user system power.
Doing so cause a device failure. 28
When power is on, do not carry the emulation pod, or subject it to
shock or vibration.
Doing so may cause a device failure. 28
When turning off the power, follow the procedure described in the
manual.
Failure to do so may cause a device failure. 29
Attention Insert the power plug firmly in the receptacle.
Failure to do so may cause a failure or a fire. 11
Caution The device can be damaged during transport. Store the packing
materials used to ship the emulation pod and use them if you
need to transport it. 2
Using the emulation pod at an ambient temperature or humidity
outside the specified range may cause a device failure. Always
use the emulation pod within the specified temperature and
humidity range. 6
CAUTION