iv
Indicates that improper use may cause minor or moderate injury,
or may damage the emulation pod, connected equipment, data
or other software resources, or other property.
Warning
text/symbol
Warning
page:
Plug
Before moving the emulation pod, disconnect the power plug
from the receptacle.
Also, disconnect all other cables.
Watch where you step during work.
Damaging a cable may cause a fire or electric shock. A falling
device may cause injury.
10
If the emulation pod will not used for a long time, for safety
reasons, disconnect the power plug from the receptacle.
Failure to do so may cause a fire or electric shock.
10
Prohibition
Do not put the emulation pod in a location subject to severe
vibration or in a location that is not level or stable. Doing so
may cause a failure or cause the emulation pod to fall.
11
Do not put the emulation pod in a location near a speaker or
television tuner or in any location subject to a magnetic or
electric field. Doing so may cause a failure.
11
When disconnecting the power plug or a cable, hold the
power plug or connector itself. Do not pull on the cable.
Pulling on a cable may cause the core wire to be exposed or
cut, resulting in a failure, fire, or electric shock.
11, 12
To prevent damage from static electricity, do not let a finger or
object contact a connector pin.
12
Do not block the emulation pod's ventilation openings.
Blocking ventilation openings causes heat to accumulate and
may cause a fire.
11, 12
Do not subject the emulation pod to a shock.
Doing so may cause a failure.
12
Do not place the emulation pod in direct sunlight, in a high-
temperature or high-humidity environment, or in an environ-
ment in which condensation can form.
12
Do not store the emulation pod in a dusty location.
Doing so may cause a failure.
12
Because the emulation pod uses many electronic parts, do
not store it in a location subject to strong electric or magnetic
fields for a long period.
Doing so may cause a failure.
12
Before connecting or disconnecting a cable, turn off the
power.
Failure to do so may cause an electric shock.
17,
19, 20
CAUTION
Summary of Contents for MB2145-507
