28
CHAPTER 2 CONNECTION AND SETTINGS
2.9
Power-on Sequence
When all connections and settings have been completed, turn on the power of the host
machine, emulation pod, and user system in this sequence.
■
Power-on Sequence
Turn on the power after completing all connections and settings in the sequence shown in
Figure 2.9-1.
Figure 2.9-1 Power-on Sequence
To turn on the power of the emulation pod, press the power switch on the rear of the 2140 main
unit toward the “I” side.
Prohibition
When turning on the power, follow the procedure described in the
manual.
Failure to do so may cause a device failure.
After the emulation pod power is turned on, do not turn off and turn
on the user system power.
Doing so may cause a device failure.
When power is on, do not carry the emulation pod, or subject it to
shock or vibration.
Doing so may cause a device failure.
CAUTION
Summary of Contents for MB2145-507
