Fujitsu MAM3184MC, Product/Maintenance Manual

Page: 146 / 152

IN-4 C141-E134-01EN
sense data analysis 7-3
sense key, sense code, and subsense
code 7-1
sequential starting of spindle motor 4-10
service clearance area 4-6
service life 2-6, 6-6
service system and repair 6-7
servo circuit 8-3
servo gain adjustment 8-6
setting bus width of SCSI interface 5-9
setting check list 5-10
setting of SCSI interface operation mode 5-8
setting parameter 5-18
setting SCSI terminator power supply 5-7
setting terminal 5-4, 5-5, B-2
setting terminator power supply 5-7
SG terminal 4-12
spare area in cell 3-5
spare disk drive 5-22
specification 2-1
specifying CDB 5-17
spindle mechanism 8-2
spindle motor 1-7
spindle motor drive circuit 8-3
standard feature 1-2
START/STOP command 5-12
start/stop of spindle motor 1-4
storage 5-2
surface temerature measurement point 4-6
surface temperature check point 4-6
Sync Mark 3-8
system configuration 1-8,
system-level field troubleshooting 6-14
system space 3-4
T
test 6-10
test flowchart 6-11
test program 6-4
tool and test equipment 6-10
track format 3-5
track skew and cylinder skew 3-6
track skew/cylinder skew 3-7
troubleshooting at repair site 6-15
troubleshooting procedure 6-13
troubleshooting with disk drive replacement in
field 6-13
troubleshooting with parts replacement in
factory 6-16
U
unpackaging 5-2
unrecoverable error rate 2-5
user space 3-3
V
verify error recovery parameter 5-19
W
write circuit 8-7
write protect 5-8
write protect setting 5-8
write-read test 6-5
write/read test 6-2
-WTP 4-1