Fujitsu MAH3091MC - Enterprise 9.1 GB Hard Drive, Maintenance Manual

Page: 8 / 157

C141-E103-01EN vii
This manual indicates;
Decimal number: Indicates as it is.
Hexadecimal number: Indicates as X’17B9’, 17B9h, or 17B9H
Binary number: Indicates as “010”
DISCLAIMER
Failure of the MAH series and MAJ series intelligent disk drive is defined as a failure requiring
adjustments, repairs, or replacement. Fujitsu is not responsible for drive failures caused by misuse by the
user, poor environmental conditions, power trouble, host problems, cable failures, or any failure not caused
by the drive itself.
The suffix of the model name of the disk drive varies depending on the electrical requirements, capacity,
and data format at factory shipment of the SCSI, i.e., the interface for connecting the three device types or
host system and the disk drives (Note 1). However, in this manual, the typical model names (Note 2) are
used unless otherwise noted. These disk drives may be called intelligent disk drives (IDD), drives, or
devices in this manual.
Note 1: Model names
M AJ 3 364 MC
Interface types MC: LVD, 16-bit SCSI SCA2 connector 160MHz transfer
MP: LVD, 16-bit SCSI 68 pin connector 160MHz transfer
Formatted capacity (100 MB units)
Disk drive size 3: 3.5 type. Hand Disk Drive
Type AH: Number of rotations 7,200min
-1
(7,200rpm)
AJ: Number of rotations 10,025min
-1
(10,025rpm)
Note 2: Type model name
Type model name Model name
MAH3182 MAH3182MC, MAH3182MP
MAH3091 MAH3091MC, MAH3091MP
MAJ3364 MAJ3364MC, MAJ3364MP
MAJ3182 MAJ3182MC, MAJ3182MP
MAJ3091 MAJ3091MC, MAJ3091MP