Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf, Operator'S Manual

Page: 97 / 116

7-14
M4097D has built-in Image Processing. The following image processing is supported both by the
M4097D and the IPC-4D. As a default, the scanner built-in functions are enabled. By setting "On"
using the Operator Panel, the IPC-4D image processing overrides the built-in functions.
Image Processing IPC-4D M4097D
1 Emphasis/Smoothing 5 x 5 matrix 3 x 3 matrix
2 Outline Pre-threshold Laplacian Laplacian
3 Simplified Dynamic Threshold IPC-2 like SDTC 3 x 3 max-min
The IPC-4D support of those functions is intended for compatibility with the IPC-3/3D. The matrix size
used in the IPC-4D is larger than the one in the M4097D. The M4097D Built-in Dynamic Threshold is a
new algorithm.
NOTICE
17. Setting ADF page edge filter
1 Press "Next" or "Previous" and let
the scanner display Screen 57.
2 At Screen 57, press and select "Yes"
to change the setting. Then, press
to display Screen 57-1.
3 If you want to change the default setting,
select "Yes" by button and press
to display Screen 57-2.
If you do not want to change the setting,
select "No" by button and press
to display Screen 57-2.
NOTICE
When you select "Yes", the values on the Screen 57-2 through 57-5 become "0".
<Screen 57>
<Screen 57-1>
<Screen 57-2>