x
•
Connect the device and the attached
peripherals to the same circuit. Otherwise
data may be lost, for instance during a
power failure, if the fixed device continues
to operate but the peripheral device (e.g. a
memory subsystem) fails.
•
When you connect the cables and install
additional components (e.g. hard disk, main
memory) watch the edges of the case or
components. These may be sharp or hot
while in operation (danger of injury).
•
Please read the security and operating
information in the manual for the system
where you are installing the additional
components.
Additional safety notes for
devices with radio components
The following additional safety notes apply
for devices with radio components (e.g.
BLUETOOTH, Wireless LAN):
•
Switch off the device, when you are in a
hospital, an operating room or near a medical
electronics system, as the radio waves
transmitted by the radio component can
impair the operation of the medical devices.
•
Keep the device at least 20 cm from a
pacemaker, as otherwise the proper operation
of the pacemaker may be impaired by radio
waves.
•
The radio waves transmitted by the radio
component can cause an unpleasant
humming in hearing aids.
•
If the radio component cannot be switched
off, remove the battery or disconnect the
power supply.
•
Switch off the radio component, when you let
the device get near flammable gases or into
hazardous environments (e.g. petrol station,
paintshops), as the transmitted radio waves
can cause an explosion or a fire.
•
Deactivate the radio components in
blasting areas and in the vicinity of blasting
operations.
•
It is not generally permitted to use radio
components on airplanes. To date, no case
of damage to the on-board electronics of an
aircraft has been proven, but interference
with the sensitive devices cannot be ruled
out. Please follow the crew’s instructions in
all cases.
•
With data traffic via a wireless connection, it
is also possible for unauthorised third parties
to receive data.
•
The company Fujitsu cannot be held
responsible for radio or television faults
arising from unauthorised changes made
to this device. Fujitsu is, furthermore, not
responsible for replacing and / or exchanging
connector cables and devices which have
not been specified by Fujitsu. The user is
solely responsible for repairing faults arising
from such unauthorised changes made to a
device and for replacing and / or exchanging
devices.
•
Switch off the radio component for security
reasons when you cannot exclude that the
transmitted radio waves can negatively affect
electrical and electronic devices in your
surrounding area.
0_JOG_M2010_Intr_EN.indd 10
3/10/09 11:17:05 AM
