Fujitsu LIFEBOOK T935 Operating Manual Download Page 87

Page: 87 / 129

Troubleshooting and tips

The notebook stops working

Notebook

Ending

Cause

Troubleshooting

The notebook is in energy saving mode.

►

End energy saving mode.

An application program has caused the
malfunction.

►

Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).

The battery is dead.

►

Charge the battery.

►

Insert a charged battery.

►

Connect the AC adapter to the notebook.

The printer does not print

Printerdoesnotprint

Cause

Troubleshooting

The printer is not switched on.

►

Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).

The printer is not connected correctly.

►

Check that the data cable connecting
the notebook to the printer is properly
connected.

The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.

►

Check whether the correct printer driver is
loaded (refer to the printer documentation).

The wireless connection to a network does not work

Thewireless connectiontoanetwork does notwork

Cause

Troubleshooting

The wireless component is switched off.

►

Switch the wireless component on (see

"Switching the wireless components on and
off", Page 56

The wireless component is switched on. Despite
this, the wireless connection to a network does
not work.

►

Check whether the wireless connection is
enabled by the software.

►

Further information on using the wireless
component can be found in the help

les.

Fujitsu

Summary of Contents for LIFEBOOK T935


































































































































Search results

Summary of Contents for LIFEBOOK T935

Reviews:

Related manuals for LIFEBOOK T935

Brands by name

Popular brands

Fujitsu LIFEBOOK T935, Operating Manual

Search results

Summary of Contents for LIFEBOOK T935

Reviews:

Related manuals for LIFEBOOK T935

Brands by name

Popular brands