Fujitsu LIFEBOOK T935 Operating Manual Download

Page: 121 / 129

Readme file in the same location as the other software folders. Otherwise auto-
installation of the software will not be supported.

4. Inside the Auto Installer software package, launch FjAutoinstall.exe as

administrator.

5. Click [Yes] on the User Account Control dialog box. This will take some time to

process the software packages. A message will be displayed during this time
stating “Please wait while the content is being processed”.

6. If the EULA is displayed for Fujitsu Software Auto Installer, accept the EULA,

otherwise continue.

7. The Fujitsu Software Auto Installer user interface will be launched providing the

ability to auto install the software downloaded from
support site.

8. It is recommended that you install all the software in the listed order. You can

“Select All”, to install the software in the order listed.

9. Click the [Install] button to start the installation.

10. After installing all the selected drivers, the Installation Results window is

displayed. Click [OK].

11. “You must restart the system for the settings to take effect. Do you wish to reboot

now?” message appears. Select [Yes].

12. The system will now reboot.

Windows 10 Procedures

It is very important that you create your Recovery Drive before beginning to use your
system.

It is also important that you create a backup of the content of the “C:\Drivers” on your
system to writable media or an external drive. System-Specific Software Drivers are
also available for download through the Fujitsu support site.

Note:

Most of the information below comes from the Microsoft page http://windows.

microsoft.com/en-us/windows-10/windows-10-recovery-options. Please refer to it for
more details.

Fujitsu

Summary of Contents for LIFEBOOK T935


































































































































Search results

Summary of Contents for LIFEBOOK T935

Reviews:

Related manuals for LIFEBOOK T935

Brands by name

Popular brands

Fujitsu LIFEBOOK T935, Operating Manual

Search results

Summary of Contents for LIFEBOOK T935

Reviews:

Related manuals for LIFEBOOK T935

Brands by name

Popular brands