Fujitsu LifeBook S762 Operating Manual Download Page 31

Page: 31 / 104

Working with the notebook

Key combinations

The following description of key combinations refers to functions when using
Microsoft Windows. Some of the following key combinations may not function in
other operating systems and with some device drivers.

Key combinations are entered as follows:

►

Press and hold the

rst key in the combination.

►

While holding the

rst key down, press the other key or keys in the combination.

The key combination

Ctrl

Alt Gr

Ctrl

Alt

can be used on

external keyboards that do not not feature a

key.

Combination

Description

Sleep mode

Fn+F1

Sleepmode

This key combination is used to activate the suspend mode (S3).

Enable/disable loudspeakers

Fn+F3

Loudspeakers

This key combination switches your notebook’s loudspeakers off
and on.

Switching the touchpad on/off

Fn+F4

Touchpad

Loudspeakers

This key combination enables and disables the touchpad.

Enlarge display

Fn+F5

Display

Full-screenmode

This key combination enlarges the screen to the full-screen mode or
switches it back to the normal mode.

Decrease screen brightness

Fn+F6

Screenbrightness

This key combination decreases the brightness of the screen.

Increase screen brightness

Fn+F7

Screenbrightness

This key combination increases the brightness of the screen.

Decrease volume

Fn+F8

Volume

This key combination reduces the volume of the integrated
loudspeakers.

Volume increase

Fn+F9

Volume

This key combination raises the volume of the integrated
loudspeakers.

Fujitsu Technology Solutions

Summary of Contents for LifeBook S762









































































































Search results

Summary of Contents for LifeBook S762

Reviews:

Related manuals for LifeBook S762

Brands by name

Popular brands

Fujitsu LifeBook S762, Operating Manual

Search results

Summary of Contents for LifeBook S762

Reviews:

Related manuals for LifeBook S762

Brands by name

Popular brands