Fujitsu LifeBook S762 Operating Manual Download Page 27

Page: 27 / 104

Working with the notebook

Caps Lock indicator

Indicator is lit

The Caps Lock key has been pressed. All the characters you type will appear
in upper case. In the case of overlay keys, the character printed on the upper
left of the key will appear when that key is pressed.

Indicator is not
lit

The Caps Lock function is not activated.

Scroll Lock indicator

Indicator is lit

The key combination

Scr

has been pressed. The effect of this varies

between applications.

Indicator is not
lit

The key combination

Scr

has not been pressed.

Switching on the notebook

►

Open the LCD screen.

Switching on

►

Press the ON/OFF switch for about one
second to switch the notebook on.

The power-on indicator is lit.

Notebook: switching off

Back up your data and close all applications before you switch off your
device. Otherwise data might be lost.

►

Shut down the operating system properly
(e. g. from the Windows

Start

menu, by

clicking on

Start – Shut Down – OK

Notebook

►

If the notebook is not switched off
automatically, press the ON/OFF switch
for approx.

ve seconds.

►

Close the LCD screen.

Fujitsu Technology Solutions

Summary of Contents for LifeBook S762









































































































Search results

Summary of Contents for LifeBook S762

Reviews:

Related manuals for LifeBook S762

Brands by name

Popular brands

Fujitsu LifeBook S762, Operating Manual

Search results

Summary of Contents for LifeBook S762

Reviews:

Related manuals for LifeBook S762

Brands by name

Popular brands