Fujitsu Lifebook S2110, User Manual

Page: 55 / 120

47
U s e r - I n s t a l l a b l e F e a t u r e s
Figure 4-14. Removing a Memory Upgrade Module
4. Store the memory upgrade module in a static
guarded sleeve.
5. Replace the cover. (Figure 4-13)
6. Replace the screws.
CHECKING THE MEMORY CAPACITY
Once you have changed the system memory capacity by
replacing the installed module with a larger one, be sure
to check that your notebook has recognized the change.
Check the memory capacity by clicking [Start] ->
Settings -> Control Panel, then double-clicking the
System icon. Select the General tab and check the
amount of memory under “Computer:”.
There may be a variation between the actual memory
size and what is displayed. This is due to the fact that
your system uses a video graphics chip which allocates
system memory to accelerate graphics performance.
■ The ATI internal graphics used in your
system has a preset amount of shared
memory, up to 128 MMB.
■ If the total memory displayed is incor-
rect, check that your memory upgrade
module is properly installed.
(If the mod-
ule is properly installed and the capacity
is still not correctly recognized, see
Troubleshooting on page 53.
S Series.book Page 47 Thursday, June 2, 2005 3:28 PM