Fujitsu Lifebook S-4510, User Manual

Page: 78 / 116

69
T r o u b l e s h o o t i n g
Notebook fails to recognize
DVD/CD-RW/CD-ROM’s.
(continued) Wrong drive designator was
used for DVD/CD-RW/CD-
ROM in the application. Verify the drive designator used by the application is
the same as the one used by the operating system.
When the operating system is booted from a DVD/
CD, drive designations are automatically adjusted.
Windows DVD/CD-RW/CD-
ROM auto insertion function
is disabled. Start the DVD/CD-RW/CD-ROM from the desktop
or application software or re-enable the Windows
DVD/CD-RW/CD-ROM auto insertion function.
(See Automatic Insertion Function on page 54 for
more information)
DVD/CD-RW/CD-ROM is
dirty or defective. Wipe DVD/CD-RW/CD-ROM with a non-abrasive
CD cleaning cloth and reinsert. It if still will not
work try another DVD/CD-RW/CD-ROM in
the drive.
The DVD/CD-RW/CD-
ROM Access indicator on
the Status Indicator Panel
blinks at regular intervals
when no DVD/CD-RW/
CD-ROM is in the tray or
the DVD/CD-RW/CD-
ROM drive is not installed. The Windows DVD/CD-RW/
CD-ROM auto insertion func-
tion is active and is checking to
see if a DVD/CD-RW/CD-
ROM is ready to run. This is normal. However, you may disable this feature.
(See Automatic Insertion Function on page 54 for
more information)
Port Replicator Problems
Notebook does not turn
on when installed in
Port Replicator Port Replicator AC adapter is
not plugged in. Provide power to the Port Replicator.
Notebook is not properly
seated in the Port Replicator. Remove and re-dock your notebook.
Floppy Disk Drive Problems
You cannot access your
floppy disk. You tried to write to a write
protected floppy disk. Eject the floppy disk and set it to write enable. (See
Preparing a Disk for Use on page 47 for more informa-
tion)
Floppy disk is not
loaded correctly. Eject floppy disk, check orientation and re-insert.
(See Ejecting a Disk on page 47 for more information)
BIOS setup utility states
Diskette Controller:
Disabled.
Revise the setup utility Main menu settings to
enable Diskette Controller. (See BIOS Setup Utility
on page 33 for more information)
The floppy disk drive may not
be properly installed. Remove and re-install your floppy disk drive.
Security is set to protect access
to floppy disk data. Verify your password and security settings.
Problem Possible Cause Possible Solutions