Fujitsu Lifebook P770 Operating Manual Download

Page: 37 / 86

Working with the notebook

Installing a battery

►

Position the battery at the edge.

►

Carefully push the battery into the battery compartment until it can be felt to engage.

►

Complete the removal, see chapter

"Finishing component removal", Page 66

Optical drive

Opticaldrive

This product contains a light emitting diode, classi

ed in accordance with IEC

8251:1993: LASER CLASS 1, and must therefore not be opened.

Handling data carriers

Handling

Observe the following guidelines when handling data carriers:

•

Avoid touching the surface of a data carrier. Only handle data carriers by their edges.

•

Always store data carriers in their cases. This will protect the data carrier against
being covered in dust, scratched or damaged in any other way.

•

Protect your data carriers against dust, mechanical vibrations and direct sunlight.

•

Avoid storing a data carrier in areas subject to high temperatures or humidity.

You may use both 8-cm and 12-cm data carriers in the optical drive.

When using a data carrier of lesser quality, vibrations and reading errors may occur.

Fujitsu Technology Solutions

Summary of Contents for Lifebook P770























































































Search results

Summary of Contents for Lifebook P770

Reviews:

Related manuals for Lifebook P770

Brands by name

Popular brands

Fujitsu Lifebook P770, Operating Manual

Search results

Summary of Contents for Lifebook P770

Reviews:

Related manuals for Lifebook P770

Brands by name

Popular brands