Fujitsu Lifebook P770 Operating Manual Download

Page: 34 / 86

Working with the notebook

Webcam

Webcam

Depending on the software used, you can use your Webcam to take pictures,
record video clips or take part in web chats.

•

The picture quality depends on the lighting conditions and the software being used.

•

You can only operate the webcam with a particular application (e.g. an Internet telephony
program or a video conferencing program which supports a webcam).

•

When using the webcam the notebook support must not wobble.

•

The webcam automatically adjusts itself to the current light level. For this reason
the LCD screen may

icker while the light level is adjusted.

Further information on use of the webcam and additional settings can be found
in the help function of the program which uses the webcam.

If you wish to carry out a function test with your webcam, you can use the
corresponding test software available at

"http://ts.fujitsu.com/support/"

Fujitsu Technology Solutions

Summary of Contents for Lifebook P770























































































Search results

Summary of Contents for Lifebook P770

Reviews:

Related manuals for Lifebook P770

Brands by name

Popular brands

Fujitsu Lifebook P770, Operating Manual

Search results

Summary of Contents for Lifebook P770

Reviews:

Related manuals for Lifebook P770

Brands by name

Popular brands