Fujitsu LIFEBOOK P728 Page 94 Operating Manual Download

Page: 94 / 126

Troubleshooting and tips

The cursor does not correctly follow the
stylus movements

Cause

Troubleshooting

Stylus incorrectly calibrated.

► Calibrate the stylus as shown under

Hardware and Sound / Tablet PC Settings

in the Control Panel, see

"Adjusting the

stylus", Page 37

and

"Calibrating the stylus",

Page 37

Stylus input not working

Cause

Troubleshooting

Incorrect driver installed.

► If your device is one which can only be

operated using the stylus, install the driver
for the standard model.

► If your device is one which can be

operated using the stylus and by ﬁnger,
install the driver for the "Dual Digitizer"
model.

The stylus is in power saving mode.

► Press gently on the tip of the stylus to

reactivate the stylus.

The stylus battery is completely discharged.

► Carefully insert the stylus in its slot on the

notebook to charge the stylus battery.

The notebook does not start after switching it on

Notebook

Cause

Troubleshooting

The battery is not installed correctly.

► Check whether the battery is installed

correctly in its compartment.

► Switch the notebook on.

The battery is dead.

► Charge the battery.

► Insert a charged battery.

► Connect the AC adapter to the notebook.

The AC adapter is not connected properly.

► Check whether the AC adapter is properly

connected to the notebook.

► Switch the notebook on.

Fujitsu

Summary of Contents for LIFEBOOK P728































































































































Search results

Summary of Contents for LIFEBOOK P728

Reviews:

Related manuals for LIFEBOOK P728

Brands by name

Popular brands

Fujitsu LIFEBOOK P728, Operating Manual

Search results

Summary of Contents for LIFEBOOK P728

Reviews:

Related manuals for LIFEBOOK P728

Brands by name

Popular brands