manualshive.com logo in svg

Fujitsu Lifebook B112, User Manual, Page: 98 / 174

Share
Download
Fujitsu Lifebook B112 User Manual Download Page 98

Menu Field

Options

Default

Description

Power Savings:

Disabled; Customized;

[Customized]

Sets the power savings parameters to a factory installed

Maximum Power Savings;

combination of parameters, a custom set of parameters set by you

Maximum Performance.

or no power saving features.

Factory Installed Values for Power Saving Profiles

Profile

Hard Disk Timeout

Video Timeout

Idle Mode

Standby Mode

Auto Suspend Mode

Customized:

Off.

Off.

On.

4 Minutes.

15 Minute.

Maximum 

30 seconds.

2 Minutes.

On.

1 Minute.

5 Minutes.

Power Savings:

Maximum 

Off.

Off.

Off.

Off.

15 Minutes.

Performance:

Disabled:

Off.

Off.

Off.

Off.

Off.

Sample Customized Profile:

2 Minutes.

1 Minute.

On.

1 Minute.

5 Minutes.

(To get even better battery
life keep the display and 
volume settings as low as
possible by using this 
custom setting.)

Table 4-13 Fields, Options and Defaults for the Power Menu.

S e c t i o n   F o u r

84

Summary of Contents for Lifebook B112















































































































































































Reviews:

No comments