Fujitsu Lifebook B112, User Manual, Page: 124 / 174

S e c t i o n F i v e
110
C A U T I O N
Never remove screws except the ones
specifically shown in the directions for
installing and removing the memory
upgrade module.
To Install a Memory Upgrade Module
1. Turn off power to your notebook using the
power switch, (see Power Off on page 16),
and remove any power adapter (AC or
auto/airline.)
THEFT PREVENTION LOCK
A physical security system lock can be installed
on the right side of your notebook. (See Figure
1-7 on page 6 for the location of the lock slot.)
Simply insert the key end of your security
system in the slot, rotate 90 degrees and lock.
(See Figure 1-7 on page 6.)
MEMORY UPGRADE MODULE
Your notebook has 32MB of installed SDRAM.
To increase your memory capacity you may
install a memory upgrade module in the
memory upgrade compartment in the bottom
of your notebook. A memory upgrade module
is a dual-in-line memory module (DIMM).
You may add a module of different capacity.
SDRAM memory upgrade modules are required.
Figure 5-9 B112 Memory Upgrade Compartment
Memory Upgrade
Compartment
Figure 5-10 Memory Upgrade Installation
P O I N T
For further information about memory
modules for upgrades please visit our
web site at www.fujitsu-pc.com.