manualshive.com logo in svg

Fujitsu Lifebook B112, User Manual, Page: 48 / 174

Share
Download
Fujitsu Lifebook B112 User Manual Download Page 48

C A U T I O N

Do not move either device during 
communication as it may interrupt
data transmission.

the original source. When doing a recov-
ery remember that you must allocate
space for the Save-to-Disk function if
you have it enabled. (See Setting Up
Your Save-to-Disk File Allocation on
pages 100-101 for more information.)

S e c t i o n   T h r e e

34

C A U T I O N

If you reformat the internal hard drive
ALL data including the operating system,
applications software and user data will
be erased. Unless data is copied to floppy
disks or other data storage media it will
be permanently lost. All software will
need to be re-installed and data files
restored from your back-up disks. See
the operating system manual for more
information on backing-up your data 
files. The factory installed software,
including the operating system, can be
restored from the Recovery CD-ROM
which came in the accessories compart-
ment when you purchased your note-
book. (See Restoring Your Pre-installed
Software from CD-ROM on page 133 for
more information.)

Any application soft-

ware which you have purchased and
installed will have to be re-installed from 

INFRARED PORT

Infrared IrDA-compatible communication 
is a function that allows for wireless data 
transfer between your notebook and other
IrDA-compatible devices. Examples of IrDA-
compatible devices are another computer or a
printer. When carrying out this kind of com-
munication, both devices must be set so their
infrared ports are directly facing each other
without obstructions. A distance of 6" to 36"
between the device ports is ideal. Dirt or
scratches on the lens of your notebook or the
other device will degrade performance.
With Windows 98, you can use the Infrared
Recipient program for infrared file transfers.
LapLink software can also be used for infrared
file transfers. See your online help for 
more information.

INTERNAL MODEM

Your LifeBook B112 is configured with a 56K
fax/data/voice modem with V.90 support.

C A U T I O N

The internal modems on all Fujitsu 
notebooks from Fujitsu PC Corporation
are not qualified for use with telephone
systems outside the United States and
Canada and may not operate in 
other countries.

Summary of Contents for Lifebook B112















































































































































































Reviews:

No comments