Fujitsu IP-900D, Hardware User'S Manual

Page: 21 / 116

Chapter 1 Preparations
IP-900E/IP-900D/IP-900IID
7
No. Names Description
(11)
RS-232C port
(RS-232C)
RS-232C data communication port.
See Section 2.5, “Connection to an RS-232C Device,” for an
explanation on using this pin. See Section 4.2, “Cable and Connector
Details,” for cable connection information.
(12)
Audio input
(ANALOG AUDIO IN) (L), (R)
Unbalanced audio input terminal.
See Section 2.3, “Audio and Video Device Connections,” for an
explanation on using this terminal. See Section 4.2, “Cable and
Connector Details,” for cable connection information.
(13)
FG terminal
(FG
)
Use for an FG connection to this equipment.
See Section 2.2.1, “Connection to ground,” for an explanation on using
this terminal.
(14)
Maintenance mode switch
(MNT)
IP-900E start mode selector switch. when the IP-900E is powered on
with this switch held down, it starts in initial start mode.
See section 3.3, “Special Use of MNT Button,” for an explanation on
using this switch.
(15)
HDMI input
(HDMI)
Digital HDMI video input terminal. 50Ω unbalanced.
See Section 2.3, “Audio and Video Device Connections,” for an
explanation on using this terminal. See Section 4.2, “Cable and
Connector Details,” for cable connection information.
(16)
SDI video input
(SDI)
Digital HD-SDI video input terminal. 75Ω unbalanced.
See Section 2.3, “Audio and Video Device Connections,” for an
explanation on using this terminal. See Section 4.2, “Cable and
Connector Details,” for cable connection information.
(17)
Video input
(ANALOG VIDEO IN)
Analog video in put terminal. 75Ω unbalanced.
See section 2.3, “Audio and Video Device Connections,” for an
explanation on using this terminal. See Section 4.2, “Cable and
Connector Details,” for cable connection information.
(18)
CF CARD slot Slot in which a CompactFlash
@
card is inserted.
(19)
AUX port
(AUX)
Auxiliary port.
(20)
Test port Factory test port.