background image

En-2

 WARNING

•   Do not start or stop the operation of this product by 

inserting or pulling out the power plug, or by turning 

on or off the circuit breaker.

• 

Do not use flammable gases near this product.

• 

Do not expose yourself directly to the cooling airflow 

for many hours.

• 

Do not insert your fingers or any other objects into 

outlet port or inlet port.

•  Do not operate with wet hands.

•  Do not use means to accelerate the defrosting 

process or to clean this product, other than those 

recommended by the manufacturer.

•  Do not pierce or burn.

 

 CAUTION

•  Provide occasional ventilation during use.

• 

Always operate this product with air filters installed.

•  Ensure that any electronic equipment is at least 1 m 

(40 in) away from this product.

•  Disconnect all the power supply when not using this 

product for extended periods.

•  After a long period of use, ensure to get the mounting 

of the indoor unit checked to prevent this product from 

falling down.

• 

The airflow direction and the room temperature should 

be carefully considered when you use this product in a 

room with infants, children, elderly or sick persons.

•  Keep the surroundings of the outdoor unit clean and 

tidy, and do not place items around it. Any objects 

blocking or entering from the outlet ports may cause 

product malfunction.

• 

Do not direct the airflow at fireplaces or heating apparatus.

•  Do not block or cover the intake grille and the outlet port.

• 

Do not apply any heavy pressure to radiator fins.

•  Do not climb on, place objects on, or hang objects 

from this product.

•  Do not place any other electrical products or 

household belongings under this product. Dripping 

condensation from this product might get them wet, 

and may cause damage or malfunction of your 

property.

•  Do not expose this product directly to water.

•  Do not use this product for preservation of food, plants, 

animals, precision equipment, art work, or other objects. 

This may cause quality deterioration of those items.

• 

Do not expose animals or plants to the direct airflow.

•  Do not drink the drainage from the air conditioner.
•  Do not pull the power supply cable.

• 

Do not touch the aluminum fins of heat exchanger 

built-in this product to avoid personal injury when you 

maintain the unit.

•  Do not stand on unstable steps when operating or 

cleaning this product. It may overturn and can cause 

injury.

This product contains fluorinated greenhouse gases.

 

 CAUTION

• 

If leaking battery fluid comes in contact with your skin, 

eyes, or mouth, immediately rinse with plenty of clean 

water, and consult your physician.

•  Exhausted batteries must be removed immediately, 

and be disposed according to the local laws and 

regulations of your region.

•  Do not attempt to recharge dry batteries.

•  Do not use dry batteries that has been recharged.

Indoor unit accessories

Please check that the following accessories are included.

Remote controller

Remote controller 

holder

Tapping screws

Batteries

Air cleaning filters

Filter holders

Remote controller holder installation

3

2

1

Battery loading and remote controller preparation 

(R03/LR03/AAA x 2)

5
7

6

4

8

1

2

3

1~3.

 Put batteries as shown in the figure above.

4. 

Press 

 to start clock setting.

5. 

Press 

(

)

 to set day of the week (Monday to 

Sunday). 

* By pressing 

, the time indicator can be changed 

from a 24-hour to a 12-hour clock.

6. 

Press 

 to continue.

7. 

Press 

(

)

 to set the clock.

Press the buttons to change the clock by a minute. 

Press down the buttons to change the clock by 10 minutes.

8. 

Press 

 to complete the setting.

Be close to the indoor unit. If you press the button from a 

distance, settings may not be properly sent.

NOTES:

• 

Use specified type of batteries only. 

• 

Do not mix different types or new and used batteries together.

• Batteries can be used about 1 year in ordinary use.

•  If the remote control range noticeably shortens, replace the 

batteries, and press 

 as shown in page 4.

Insert

Screws

Slide up

2. PREPARATION

 WARNING

•  Take care to prevent infants and young children from 

accidentally swallowing the batteries.

Summary of Contents for Halcyon ASUG09-12LMAS

















Reviews: