Getting started
Vertical operating position
Verticaloperatingposition
Operatingposition,vertical
Base feet
Sidecover
If you wish to operate the device in the vertical operating position, use
the two feet supplied for vertical operation.
Only mount the feet on the device side shown in the diagrams.
If connecting many cables to the device, ensure that the device is in a stable
position, in order to prevent it from toppling over.
Proceed as follows to prepare the device for the vertical operating position:
►
Disconnect the cables if required.
►
Lay the device on its top (narrow side) as shown, on a stable,
fl
at and clean surface.
1
3
3
3
3
1
2
►
Place the feet on the casing (1). In doing so, make sure that the 4 clips (2) on the
feet are aligned above the corresponding holes in the casing.
►
To secure the feet, press the clips in the direction of the arrow (2) until
they are felt to engage in the holes.
Fujitsu
15
