Fujitsu FPCR46271 Operating Manual Download

Page: 56 / 79

Removing and installing components during servicing

Attaching the cover

►

Place the cover in the correct mounting position (1).

If you remove more than one component at the same time, keep the screws for the
individual components separately from each other and make sure that you use the
correct screws. If you install the wrong screws, components may be damaged.

►

Tighten the screw (2).

►

Insert the battery (see Chapter

"Inserting the battery", Page 30

Removing and installing the optical drive

Removing the optical drive

►

Prepare for removal, see

"Preparing to remove components", Page 48

Harddisk

►

Remove the screw (1).



The drive is released.

►

Pull the drive out of the drive bay (2).

Fujitsu Technology Solutions

Summary of Contents for FPCR46271
















































































Search results

Summary of Contents for FPCR46271

Reviews:

Related manuals for FPCR46271

Brands by name

Popular brands

Fujitsu FPCR46271, Operating Manual

Search results

Summary of Contents for FPCR46271

Reviews:

Related manuals for FPCR46271

Brands by name

Popular brands