Fujitsu FPCR46271 Operating Manual Download

Page: 36 / 79

Working with the notebook

Inserting or removing a data carrier

Inserting

Removing

The notebook must be switched on.

►

Push the insert/eject button (1).



The drive tray will open.

►

Gently pull the drive tray (2) completely out.

►

Place the data carrier in the drive tray with
the printed side facing upwards.

►

Remove a data carrier that has
been inserted.

►

Push in the drive tray until you
feel it lock into place.

Manual removal (emergency removal)

CD/DVD:

Manualremovalofdatacarrier

Emergencyremovalofdata carrier

In the event of a power failure or damage to the drive, you can remove the data carrier manually.

►

Switch your notebook off.

►

Push a pen or a piece of wire (such as a
paperclip)

rmly into the opening (1).



The drive tray is ejected. You can now pull
the drive tray (2) out of the drive.

Fujitsu Technology Solutions

Summary of Contents for FPCR46271
















































































Search results

Summary of Contents for FPCR46271

Reviews:

Related manuals for FPCR46271

Brands by name

Popular brands

Fujitsu FPCR46271, Operating Manual

Search results

Summary of Contents for FPCR46271

Reviews:

Related manuals for FPCR46271

Brands by name

Popular brands