Fujitsu FPCR46271 Operating Manual Download

Page: 44 / 79

Security functions

Removing passwords

To remove a password (without setting a new password) perform the following steps:

Password

Supervisorpassword

Userpassword

►

Start the

BIOS Setup Utility

and go to the

Security

menu.

►

Highlight the

Set Supervisor Password

Set User Password

eld and press the Enter key.



You will be requested to enter the current password by the

Enter Current Password

prompt.

You will be requested to enter a new password by the

Enter New Password

prompt.

►

Press the Enter key twice.

►

In the

Exit

menu, select the option

Save Changes & Exit

►

Select

Yes

and press the Enter key.



The notebook will now reboot with the password removed.
Removing the supervisor password simultaneously deactivates the user password.

Password protection for booting of the operating system

With the supervisor password you have set in the

BIOS Setup Utility

(see

section

"Setting supervisor and user password", Page 39

), you can also

prevent booting of the operating system.

Operating system

Activating system protection

►

Start the

BIOS Setup Utility

and go to the

Security

menu.

Operatingsystem

►

Select the

Password on Boot

option and press the Enter key.

►

Select the desired option (

Disabled

First Boot

Every Boot

) and press the Enter key

►

Select the

Save Changes & Exit

option under

Exit



The notebook will reboot. You will be prompted to enter your password (the supervisor password).

Deactivating system protection

►

Start the

BIOS Setup Utility

and go to the

Security

menu.

Operatingsystem

►

Select the

Password on Boot

option and press the Enter key.

►

Select the

Disabled

option and press the Enter key.



If you do not want to change any other settings, you can exit

BIOS Setup Utility

►

Select the

Save Changes & Exit

option under

Exit



The notebook will reboot. The system is no longer password-protected.

Password protection for the hard disk

Passwordprotection:

The had disk password prevents unauthorised access to the hard disk drives
and is checked internally each time the system is booted. The condition for this
is that you have assigned at least the supervisor password.

Fujitsu Technology Solutions

Summary of Contents for FPCR46271
















































































Search results

Summary of Contents for FPCR46271

Reviews:

Related manuals for FPCR46271

Brands by name

Popular brands

Fujitsu FPCR46271, Operating Manual

Search results

Summary of Contents for FPCR46271

Reviews:

Related manuals for FPCR46271

Brands by name

Popular brands