Fujitsu FPCM11752 Operating Manual Download

Page: 90 / 137

Security functions

Installing SystemLock

InstallingSystemLock

During initial installation, the

rst SmartCard becomes the Admin SmartCard. Together with the

PUK, it has all access rights, and should therefore be kept in a safe place. It must only be
used by an authorised user (Administrator), for instance to initialise user cards.

You need an Admin SmartCard if you want to set up a user group. You use this
Admin SmartCard to add further systems to the user group.

Setting up the first system in a user group or a stand-alone
system for use with SystemLock

Usergroups

►

Start the device and call up BIOS Setup.

►

From the

Security

menu, choose the option

SmartCard SystemLock

The following SmartCard SystemLock menu will be displayed:

Security

SmartCard SystemLock

Item Specific Help

SmartCard SystemLock

Not Installed

Install Single PC

[Enter]

Install Group PC

[Enter]

Installs the security

from a SystemLock Admin

SmartCard into this PC

without modifying any

data on the SmartCard.

A correct SmartCard is

required for a

permanent installation.

Enter PIN:

[

]

►

Insert a new SmartCard in the reader and press Enter.

Fujitsu Technology Solutions

Summary of Contents for FPCM11752










































































































































Search results

Summary of Contents for FPCM11752

Reviews:

Related manuals for FPCM11752

Brands by name

Popular brands

Fujitsu FPCM11752, Operating Manual

Search results

Summary of Contents for FPCM11752

Reviews:

Related manuals for FPCM11752

Brands by name

Popular brands