Fujitsu FP-1000 User Manual Download

Page: 77 / 96

−

10-3. Cleaning the Thermal Head

(1) Be sure to turn off the printer power.
(2) Open the top cover.
(3) Using an alcohol solvent, remove black paper particles and other residue

from the surface of the thermal head.

Thermal Head

Caution: The thermal head can easily be damaged. Clean it carefully

using a soft cloth to avoid any damage.

Caution: The thermal head is still hot immediately after printing. Leave

it to cool for about ten minutes before cleaning.

Caution: The thermal head may be damaged by static electricity. Take

care to avoid exposing it to static electricity.

Caution: Wait until alcohol from the cleaning solvent has thoroughly

dried before turning on the printer power.

Caution: Use only alcohol or isopropyl alcohol solvents.

Summary of Contents for FP-1000

































































































Search results

Summary of Contents for FP-1000

Reviews:

Related manuals for FP-1000

Brands by name

Popular brands

Fujitsu FP-1000, User Manual

Search results

Summary of Contents for FP-1000

Reviews:

Related manuals for FP-1000

Brands by name

Popular brands