Chapter 4 Various Ways to Scan
87
Scanning Documents such as Envelopes or
Multi-Layered Transfer Paper
Sliding the feed mode switch to the left to switch the feed
mode to Manual/Single mode allows you to scan documents
such as envelopes and multi-layered transfer paper. Manual/
Single mode reduces the load on documents placed in the
feeder so that documents are fed without any fault for a
successful scan.
1
Load a document in the ADF paper chute (feeder).
To scan a multi-layered transfer paper, position the bound edge first
when loading the paper.
For details, refer to
"Chapter 2 How to Load Documents" (page 39)
.
2
Slide the feed mode switch to the left to switch the feed
mode to Manual/Single mode.
The following screen is displayed on the LCD of the operator panel.
3
Scan the document with the image scanning application.
For details, refer to the image scanning application manual.
ATTENTION
For details about the paper weights of the documents that can be
scanned, refer to
"2.3 Documents for Scanning" (page 47)
.
ATTENTION
Moving the feed mode switch during a scan causes an error.
Setting the feed mode switch to Manual/Single mode disables
[Check Overlapping (Ultrasonic)] in the multifeed detection
setting.
HINT
The scanner will wait for the next document to be loaded until the
time specified for the Timeout time elapses, even if there is no
document in the ADF paper chute (feeder).
Feed Mode
Switch