Fujitsu fi-590PRB, Operator'S Manual

Page: 9 / 18

fi-590PRB Imprinter Operator’s Guide
| 7
8. Close the Top cover and press lightly until it is
fixed with the tabs.
2.2 Operating Test
After installing the imprinter, test to see if printing can be
performed on the Offline Print Test mode.
1. While pressing the [Hopper Height] button ( U or
V ) on the operator panel, switch on the scanner.
Continue pressing on the [Hopper Height] button.
2. Release the [Hopper Height] button when the
Function Number Display changes from [P] to [b].
3. Place a blank document on the Hopper.
ATTENTION
●
Use A4 or Letter size paper. If the size is
smaller than A4 or Letter, printing may not
successfully complete.
●
Confirm that the Print Cartridge is
positioned within the document width. For
the details, please refer to “2.3
Positioning
the Print Cartridge”.
4. Press [Scan] button to test.
Ö
Paper will be fed into ADF, and the Imprinter will
print out the Print Test Characters starting at 5mm
(
±
4mm) from the paper’s edge.
HINT Print test patterns
Test pattern 1 (Horizontal):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000
Test pattern 2 (Horizontal ） :
abcdefghijklmnopqrstuvwxyz{|}~ 00000000
Test pattern 3 (Horizontal):
!”#$%&'()*+,-./0123456789:;<=>?@00000000
Test pattern 4 (Vertical):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000
Test pattern 5 (Vertical):
abcdefghijklmnopqrstuvwxyz{|}~ 00000000
Test pattern 6 (Vertical):
!”#$%&'()*+,-./0123456789:;<=>?@00000000
When multiple sheets of documents are placed in
the Hopper, the Test Print repeats patterns from 1
through 6.
The numbering data portion “00000000” changes
from 0 (Zero) with increment of 1(one).
(One test pattern is printed at a time. Press the
[Scan] button to continue printing the next test
pattern.)
5. To stop Offline Print test mode, turn off the
Scanner.
Function
Hopper Height
Paper Thicknes s
Thin
Send t o Scan
Thick
5mm
F
e
e
d
i
n
g
d
i
r
e
c
t
i
o
n
Test pattern print sample
6
5
4
3
2
c