Chapter 6 Troubleshooting
44
Device Error
The following are lists of device errors which require troubleshooting by a service engineer.
Check Indicator
Power Indicator
Item
Action
Flashes 4 times
On
A flatbed motor error occurred.
1 Confirm that the transport lock switch is not locked.
2 Turn the scanner off then back on.
If the problem persists, write down the status of the indicators and
contact your FUJITSU scanner dealer or an authorized FUJITSU
scanner service provider.
Flashes 2 times
On
An optical error (flatbed)
occurred.
Flashes 5 times
On
An operator panel error
occurred.
Turn the scanner off then back on.
If the problem persists, write down the status of the indicators and contact
your FUJITSU scanner dealer or an authorized FUJITSU scanner service
provider.
Flashes 3 times
Flashes 3 times
An internal error occurred.
Flashes 4 times
Flashes 4 times
An EEPROM error occurred.
Flashes 2 times
Flashes 2 times
A lamp circuit error occurred.
Turn the scanner off then back on.
If the problem persists, write down the status of the indicators and contact
your FUJITSU scanner dealer or an authorized FUJITSU scanner service
provider.
Flashes 5 times
Flashes 5 times
A motor circuit error occurred.
